 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 100mA / 50V Digital transistors (with built-in resistors) DTC115EM / DTC115EE / DTC115EUA / DTC115EKA Applications Inverter, Interface, Driver Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see the equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input, and parasitic effects are almost completely eliminated. 3) Only the on/off conditions need to be set for operation, making the device design easy. 4) Higher mounting densities can be achieved. Inner circuit IN R1 R2 OUT GND IN GND OUT R1=R2=100k Structure NPN epitaxial planar silicon transistor (Resistor built-in type) Dimensions (Unit : mm) DTC115EM 0.2 1.2 0.32 (3) DTC115EE 1.6 0.3 (3) 0.7 0.55 0.8 1.2 0.8 0.13 0.5 (2) (1) 0.2 0.4 0.4 0.8 0.2 0.2 0.5 0.5 1.0 0.15 ROHM : VMT3 (1) IN (2) GND (3) OUT 0.1Min. 0.22 (1)(2) 1.6 Abbreviated symbol : 29 ROHM : EMT3 Abbreviated symbol : 29 2.9 0.4 (3) (1) GND (2) IN (3) OUT DTC115EUA 2.0 0.3 (3) 0.9 0.2 0.7 DTC115EKA 1.1 0.8 1.25 2.1 (2) (1) 0.1Min. 0.65 0.65 0.95 0.95 0.15 ROHM : UMT3 EIAJ : SC-70 1.3 0.15 Each lead has same dimensions Abbreviated symbol : 29 ROHM : SMT3 EIAJ : SC-59 1.9 Each lead has same dimensions Abbreviated symbol : 29 Packaging specifications Package Packaging type Part No. DTC115EM DTC115EE DTC115EUA DTC115EKA Code Basic ordering unit (pieces) VMT3 Taping T2L 8000 - - - EMT3 Taping TL 3000 - - - UMT3 Taping T106 3000 - - - SMT3 Taping T146 3000 - - - www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 0.3Min. (1) GND (2) IN (3) OUT (2) (1) 1.6 2.8 (1) GND (2) IN (3) OUT 1/2 2009.05 - Rev.B DTC115EM / DTC115EE / DTC115EUA / DTC115EKA Absolute maximum ratings (Ta=25C) Parameter Supply voltage Input voltage Output current DTC115EM / DTC115EE Power DTC115EUA / DTC115EKA dissipation Junction temperature Storage temperature Symbol VCC VIN IO IC(Max.) PD Tj Tstg Limits 50 -10 to +40 20 100 150 200 150 -55 to +150 Unit V V mA mW C C Data Sheet Electrical characteristics (Ta=25C) Parameter Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 fT Min. - 3 - - - 82 70 0.8 - Typ. - - 0.1 - - - 100 1 250 Max. 0.5 - 0.3 0.15 0.5 - 130 1.2 - Unit V V mA A - k - MHz Conditions VCC=5V, IO=100A VO=0.3V, IO=1mA IO=5mA, II=0.25mA VI=5V VCC=50V, VI=0V IO=5mA, VO=5V - - VCE=10V, IE=-5mA, f=100MHz Transition frequency Characteristics of built-in transistor Electrical characteristics curves 10 Ta= 40 OUTPUT CURRENT : I O (mA) INPUT VOLTAGE : V I (on) (V) 25 85 125 10 VCC = 5V 1 1 0.1 Ta=125 85 25 40 0.1 0.01 V0 = 0.3V 0.1 1 10 100 0.01 0 1 2 3 INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (mA) 1000 Ta=125 85 DC CURENT GAIN : G I 25 100 40 VO= 5V OUTPUT VOLTAGE : VO(on) (V) 1 IC /II=20 Ta=125 85 25 40 0.1 10 1 0.01 0.1 1 10 OUTPUT CURENT : IO (mA) 100 0.01 0.1 1 10 100 OUOPUT CURRENT : IO (mA) www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/2 2009.05 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of DTC115EM09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |